New door knob and dead bolt installed

I have never changed a door knob or dead bolt before today.  Installing the new lever type door knob and dead bolt lock on the back door was a simple replacement job.  Changing from a standard twist knob to a lever type is easy just make sure you buy a handle that can be switched from left to right so you don’t get bound up by the door jamb/frame.  The door should be more secure as I replaced the 1/2 inch long strike plate screws with much longer screws that are screwed into the actual wood studs that frame the door and not just into finish wood around the door.

I did not lock the dead bolt at night on this door as the old lock was a key open system on both sides of the lock.  With the new dead bolt we have a simple knob we can turn on the inside of the door.  This dead bolt knob makes it much easier to get out the door in case of a house fire.

I know operating a door knob is not a big deal for most people.  Now I can grab that lever and give it a 90 degree twist/push to open the door.  The simple mechanics of a lever compared to gripping and twisting a standard round door knob is incredibly easier for me to use multiple times a day.  Plus the the new door hardware looks great on the newly painted doors and fits the new exterior very nicely.

One thing I noticed with hardware that is retro looking, such as the door levers rather that twist knobs or sink hardware levers/star type faucet fixtures is that hardware is more “Handicap Compliant/ ADA approved” compared to the average hardware around in many homes.  It is so much easier to push a lever open or close with an elbow or a hand that can’t grip as good as you age or get disabled.  Big plus is the hardware looks great in any type “look” you want in your home.  I know  now replacing a door knob is not a big deal.  Trust me getting your door open to get inside where it is warm and not fighting to get a grip on a round door knob can really cut down on the cussing!

Had an inversion in the valley this week and while it hasn’t been very cold, 30’s during the day and high teens at night the moisture of the fog  gives us chilly feeling.  The inversion has had an impact on how well the wood stoves burn and Mom and I are still trying to figure out how to use the wood stove since the house is better insulated and we have added more ceiling fans to move the air around.  I thought it would be simple this winter.  Nope, just different.

I need some help/info from you all if you make your own soft/wet dog food.  Mom and I want to make wet dog food and move the doggies off canned dog food.  I have a general idea of the grain to protein mix but I’m unsure of the vegetable matter that needs to be added and in what proportions.  Rice will be our primary grain and we will not use any sort of wheat products as our dogs do terrible on that grain.  We would be open to corn meal as a grain if you have used it for your dogs.  I also want to add fats like lard or beef tallow as I don’t have a warm a fuzzy feeling about most vegetable oils.



Comments are closed.

%d bloggers like this: